Mr. Volks. Tong
General Manager
Director Office Department
Address:
No. 22 Hengtang Road, Tangshang Village, Yong Kang, Jinhua, Zhejiang, China
Telephone:
Zip Code:
Fax:
Please sign in to view contact details |
Account Registered in:
2016
Business Range:
Consumer Electronics, Electrical & Electronics, Security & Protection, Service
Management System Certification:
ISO 9001
Business Type:
Trading Company
Company Introduction
Trade Capacity
Production Capacity
Weastchina Co., Ltd. is an over 10 years experianced company supplying earthing products.
We service Europe, America, Africa, Middle East market since 2009.
Our new production line 2019 can provide larger capacity and better quality product.
Improved our copper earth rod with the same copper thickness at any point.
With no shadow point, and with a better adherence copper coating. ...
We service Europe, America, Africa, Middle East market since 2009.
Our new production line 2019 can provide larger capacity and better quality product.
Improved our copper earth rod with the same copper thickness at any point.
With no shadow point, and with a better adherence copper coating. ...
Weastchina Co., Ltd. is an over 10 years experianced company supplying earthing products.
We service Europe, America, Africa, Middle East market since 2009.
Our new production line 2019 can provide larger capacity and better quality product.
Improved our copper earth rod with the same copper thickness at any point.
With no shadow point, and with a better adherence copper coating.
The copper layer wont peel off even we bend rod till break.
Our copper earth rod is at the high quality level with reasonable price.
Here is how we inspect final earth rod product:
Measure the diameter of the bar in positions shown on measurements page. Measure 3 positions along the length of the bar.
Rod coating thickness is measured in positions shown on measurements page. Measure 3 positions around the diameter of the bar @ 120 degree intervals and 3 positions long the length of the bar.
Cut a length of rod 200mm long and apply a 2 X45 deg chamfer. Drive the rod through the jaws. Observe the adherance of the copper coating to the steel substructure for good adhesion.
Bend the bar through 5 times (+/-1.0mm) its Diameter (71mm) to an angle of 90 deg. After bend the specimens should show no signs of cracks, sharp edges or peeling around bend.
---core steel electronic plated with 99.99% copper.
---copper thickness the same at any point of rod, no shadow part.
---good adherence after threaded. Copper wont peel off after rod be bent till break.
Thickness: 100-1000 microns
Tensile strenth: 500-580 n/mm
To meet UL 467, BS 7430 standard.
Any packing method is available.
SGS inspection before lading is available.
Welcome to visit our factory or to connect us by email for inquiry.
We service Europe, America, Africa, Middle East market since 2009.
Our new production line 2019 can provide larger capacity and better quality product.
Improved our copper earth rod with the same copper thickness at any point.
With no shadow point, and with a better adherence copper coating.
The copper layer wont peel off even we bend rod till break.
Our copper earth rod is at the high quality level with reasonable price.
Here is how we inspect final earth rod product:
Measure the diameter of the bar in positions shown on measurements page. Measure 3 positions along the length of the bar.
Rod coating thickness is measured in positions shown on measurements page. Measure 3 positions around the diameter of the bar @ 120 degree intervals and 3 positions long the length of the bar.
Cut a length of rod 200mm long and apply a 2 X45 deg chamfer. Drive the rod through the jaws. Observe the adherance of the copper coating to the steel substructure for good adhesion.
Bend the bar through 5 times (+/-1.0mm) its Diameter (71mm) to an angle of 90 deg. After bend the specimens should show no signs of cracks, sharp edges or peeling around bend.
---core steel electronic plated with 99.99% copper.
---copper thickness the same at any point of rod, no shadow part.
---good adherence after threaded. Copper wont peel off after rod be bent till break.
Thickness: 100-1000 microns
Tensile strenth: 500-580 n/mm
To meet UL 467, BS 7430 standard.
Any packing method is available.
SGS inspection before lading is available.
Welcome to visit our factory or to connect us by email for inquiry.
International Commercial Terms(Incoterms):
FOB, CFR, CIF
Terms of Payment:
LC, T/T
Average Lead Time:
Peak Season Lead Time: one month, Off Season Lead Time: within 15 workdays
Number of Foreign Trading Staff:
4~10 People
Export Year:
2016-09-01
Export Percentage:
>90%
Main Markets:
North America, Eastern Europe, Mid East, Western Europe
Nearest Port:
qingdao
Import & Export Mode:
Have Own Export License
Export License Number: | 02280718 |
---|---|
Export Company Name: | yongkang weast trade co., ltd. |
License Photo:
Factory Address:
#337 yishan roan qingdao shangdong
R&D Capacity:
OEM
No. of R&D Staff:
5-10 People
No. of Production Lines:
1
Annual Output Value:
Above US$100 Million
Ever Annual Output of Main Products:
Product Name | Units Produced (Previous Year) |
---|---|
copper plated rod | 2000000 Meter |